In the fall of 2017 I combined a number of existing designs for utility dorys and came up with the “Tusket Garvey.” After a 1′ to 1″ bristol board model the design was finalised. The 16 ft by 6’6 craft was fabricated over 5 weeks inside my 10 x 22 shop, tight to say the least

With a Hobart 250 and spool gun this vessel is constructed of aluminum, 1/8″ sheet with 1/4″ transom and bow door.

Project Shop

fish eye ruins the lines in this picture,,, but it all fits in

Boat Shop